| Customization: | Available |
|---|---|
| After-sales Service: | Free Commissioning and Training on Site |
| Warranty: | 1 Year or 2000 Working Hours |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Specifications| Model | HC95LMV |
| Shank | T38/R38 |
| Height over drill center | 86mm |
| Impact power | 21kw |
| Impact rate | 54-62 Hz |
| Hydraulic system pressure | 180-200bar |
| Rotation system | Independent rotation |
| Rotation speed max. | 296Rpm |
| Rotation torque max. | 764N.m |
| Air consumption for lubrication(at 3bar) | 300L/min |
| Water consumption | 60-120L/min |
| Weight | 183 Kg |
| Sound level | <105dB(A) |
| Feed | HTA | |
| Total Length | 6500mm | |
| Drill steel length | 4915mm | |
| Hole depth | 4500mm | |
| Feed compensation | 1600mm |
| Drilling boom extension | 1600mm |
| Parallel holding | Complete |
| Feed roll-over | 360° |
| Boom extension | 1450mm |
| Drilling Boom lifting angle, max. | +60°/-30° |
| Boom swinging angle, max. | ±35° |
| Hydraulic pumps group | 2 sets of independent system respectively for each drilling boom | |
| Pump unloading start | ||
| System pressure, max | 230 bar | |
| Hydraulic oil tank volume | 200 L | |
| Oil temperature gauge | ||
| Water cooled oil cooler | ||
| Filtration fineness | 20μm | |
| Mineral based hydraulic fluid | ||
| Max. capacity | 1.0 m3/min(at 7bar) |
| Air pressure gauge |
| Water pump | Water booster pump CDL8-16 |
| Max capacity at 13.5 bar | 133 L/min |
| Min water inlet pressure | 2 bar |
| CHINA WEICHAI Diesel engine | |
| Rated power(@2300rpm) | 103kw |
| Torque(1600-1800rpm) | 510Nm |
| Articulated steering | ±35° |
| Fixed driving seat | |
| 4 wheels drive | |
| Hydrostatic power steering system | |
| Front axle | CLG |
| Rear axle | CLG, ±8° oscillation angle |
| Total installed power | 163 Kw |
| Main motor power | 75X2 Kw |
| Voltage | 380 V(or customized) |
| Frequency | 50 Hz(or customized) |
| Length | 15600mm |
| Width | 2500mm |
| Cabin Height | 2610mm-3310mm |
| Weight | 29500Kg |
| Ground clearance | 463mm |
| No. | Name | Specification | Manufacturer |
| 01 | Drifter | HC95LMW | MONTABERT, FRANCE |
| 02 | Master pump | DANFOS, USA | |
| 03 | Master valve | BREVINI | |
| 04 | Electric motor | 75Kw |
WEG |
| 05 | Diesel engine | CUMINS | |
| 06 | Tyre | 16.00-25 | CHINA |
| 07 | Water pump | CDL8-16 |
CHINA |
| 08 | Air compressor | 1m³/min | CHINA |
| 09 |
Hydraulic oil cooler | CHINA | |
| 10 | High pressure assembly | CHINA | |
| 11 | Cable | 3×120mm²+1×35mm² | CHINA |
| 12 | Drill bit&rod | CHINA |
){kind=link}